catalog index

diode laser spectroscopy

earth's field nmr

earth's field nmr gradient/field coil system

fabry-perot cavity

faraday rotation

hall effect

magnetic force

magnetic torque

magnetic torque's magnetic force balance

modern interferometry

muon physics

noise fundamentals

optical pumping

power/audio amplifier

pulsed/cw nmr

pulsed nmr

quantum analogs

signal processor
/lock-in amplifier

sonoluminescence

torsional oscillator

two slit interference, one photon at a time

two slit's cricket

individual parts

*Note: Kenwood PR36-3A Power Supply (Now Manufactured By TEXIO)

Diode Laser Spectroscopy (DLS1-A)

This instrument comes in multiple configurations. Please see Diode Laser Spectroscopy at the left and click on - The Instrument Tab for details.

Complete Instrument Includes: Laser Head • 2 Diode Lasers (tested) • Complete Electronics • 3 Photodiode Detectors with preamp • IR Viewing Card • CCD Camera • TV Monitor • Optics with all mounts and bases • Absorption Cell Assembly • 2 Safety Goggles • Special Tools • Black Anodized Aluminum Optical Breadboard • Instructor/Student Manual. (Magnetic Experiments require a separate 36 V/3 A current regulated power supply.)

Basic Experiments Only: Does not include optics needed for simultaneous interferometry or for several magnetic field experiments.

* * * Shipping/Insurance/International Duties Additional * * *

Back to top


Earth's Field NMR (EFNMR1-B*)

EFNMR1-B: Complete Instrument Includes: Complete Electronics (Polarization Timer, High Q Tuner Amplifier, Tuning Controls, Sound Amplification, Built-In Speaker) • Sample and Bucking Coil •2 Sample Holders • Gradient/Field Coil System (x,y,z Gradient Coils, Helmholtz Field Coils, Controller with Built-In Gradient Coil Power Supply)•Segmented Sample holder with Filling Syringe • Dip Needle Compass • All Connecting Cables • Instructor/Student Manual

*Premium System (US/CA Only): Includes 2 Texio PR36-3A Power Supplies

EFNMR1-A*, Sample Coil & Controller Includes: Complete EFNMR Electronics as above • Sample and Bucking Coil • Sample Holders • All Connecting Cables • Instructor/Student Manual

*Basic with 1 Texio PR36-3A Current Regulated Power Supply: US/CA Only

EFGFC1-A*, Earth's Field NMR Gradient/Field Coils System Includes: Gradient/Field Coil System as above • Dip Needle Compass • Segmented Sample Holder with Filling Syringe • All Connecting Cables • Instructor/Student Manual

*G/F Coil with Texio PR36-3A Current Regulated Power Supply: US/CA Only

* * * Shipping/Insurance/International Duties Additional * * *

US/CA Int'l EFNMR1-B Complete Instrument (Sample Coil and Controller plus Gradient/Field Coil System)- Texio Power Supply not included 7,130.00 8,078.00  EFNMR1-B Premium System - includes two Texio supplies (US/CA Only) 7,990.00 Inquire EFNMR1-A Basic Instrument (Sample Coil & Controller) 4,685.00 5,309.00  EFNMR1-A Basic Instrument with one Texio power supply (US/CA Only) 5,115.00 Inquire EFGFC1-A: EFNMR Gradient/Field Coil System 2,738.00 3,102.00  EFGFC1-A: EFNMR Gradient/Field Coil System with Texio power supply (US/CA Only) 3,168.00 Inquire Recommended Accessories     New Spin Flip Coils (Introductory Price) 129.00 141.00 Texio PR36-3A Power Supply 579.00 Inquire Extra Sample Holder 3.20 4.00 Extra Sample HolderSegmented Sample Holder with filling syringe 89.00 101.00 Flourine Liquid Samples: (non-volatile, non-toxic) Perfluoropolyether Fluid HT-110 Perfluoropolyether Fluid HT-70 Perfluoropolyether Fluid PFS-2 38.00 38.00 38.00 42.00 42.00 42.00 Adjustable Height Non-Magnetic Stand: For use with Basic EFNMR1-A ONLY 207.00 235.00

Back to top


Fabry-Perot Cavity* (FP1-A)

Basic Instrument Includes: Confocal 20 cm Cavity • Iris • 2 Support Posts w/ bases • Manual

*FP1-A requires a variable frequency laser (See our Diode Laser (DLS1-A).
(Side bands observable with DLS1-A & RF Signal generator)

* * * Shipping/Insurance/International Duties Additional * * *

US/CA Int'l FP1-A Basic Instrument - *requires a variable frequency laser (See DLS1-A) 1,436.00 1,627.00 Recommended Accessories: If purchased along with Diode Laser (DLS1-A) as an accessory or if within one semester of Diode Laser purchase. 1,270.00 1,439.00
Back to top Faraday Rotation (FR1-A)

Basic Instrument Includes: Laser Light Source • Solenoid • Special High Verdet Constant Glass Rod • Optical Detector • Linear Polarizer in Calibrated Rotating Mount • Hardwood Mounting Base • Instructor/Student Manual

* * * Shipping/Insurance/International Duties Additional * * *

	US/CA	Int'l
FR1-A Basic Instrument	1,055.00	1,190.00
Premium Instrument - Includes Power Audio Amplifier	1,395.00	1,576.00
3 or more Premium units	1,365.00	1,542.00
Recommended Accessories:
Additional Special Glass Rod	100.00	113.00
Liquid Cell	142.00	157.00
PAA1-A: Power/Audio Amplifier	355.00	402.00
Texio PR36-3A Power Supply	579.00	Inquire

Back to top


Hall-Effect Probe (HE1-A)

Complete Instrument Includes: Probe with Axial and Radial Detectors • Non-magnetic Base and Support Rod • Calibration Kit (HECK1-A)• Instructor/Student Manual

(Requires 110 V power supply or adaptor)

* * * Shipping/Insurance Additional * * *

US/CA Int'l HE1-A Complete Instrument 335.00 380.00 3 or more units 323.00 361.00 Hall Effect Calibration Kit (HECK1-A) Only 25.00 29.00
A 5% discount will apply to any Hall Effect Probe purchased in conjunction with a Magnetic Force MF1-A Back to top Magnetic Force* (MF1-A) Complete Instrument Includes: Helmholtz Coil Assembly • Tower with Cap • Magnetic Dipole in Gimbal • Calibrated Spring with 1 g weights (set of 5) • Instructor/Student Manual

* * * Shipping/Insurance/International Duties Additional * * *

* MF1-A requires a 36 Volt, 3 A, current regulated power supply such as
the Texio PR36-A (See stand alone accessories)

	US/CA	Int'l
MF1-A Complete Instrument	435.00	492.00
5 or more units	415.00	469.00
Replacement Parts:
Tower with Cap	49.00	57.00
Magnetic Dipole in Gimbal	46.00	50.00
Brass Rod	1.60	2.00
Spring	8.50	9.00
1 g weights (set of 5)	1.60	2.00

Back to top


Magnetic Torque (MT1-B) - Now Including Magnetic Force Balance Kit

Complete Instrument Includes: Magnetic Coils • Air Bearing • Power Supply • Air Pump • One Magnetic Sphere • Electronics for Strobe Light and Counter • Rotating Magnetic Field • Gravitational Torque Arms and Sliding Weight • Magnetic Force Balance Kit • Instructor/Student Manual

* * * Shipping/Insurance/International Duties Additional * * *

US/CA Int'l MT1-B Complete Instrument 2,955.00 3,385.00    3 or more units 2,783.00 3,188.00 Without Rotating Magnetic Field -130.00 -135.00 Without Magnetic Force Balance Kit -140.00 -150.00 Additional and Replacement Parts: Magnetic Force Tower Kit Includes: Tower with Cap, Magnetic Dipole in Gimbal, Brass Rod, Calibrated Spring, Weights 106.00 121.00 MTMFB1-A Magnetic Force Balance Kit when purchased alone 186.00 210.00 Additional Magnetic Sphere 64.00 71.00 Replacement Air Pump 80.00 93.00 Replacement Flash Lamp 16.00 21.00 Torque Arm 6.00 7.00 Sliding weight for Torque Arm 7.00 8.00

Back to top


Modern Interferometry (MI1-A)

Complete Instrument Includes: See pdf for detailed list.

Components Require Breadboard with English Dimensions (1" center spacing, 1/4-20 tapped holes)

Magnetostriction experiments require a current regular power supply capable of 36 V, 3 A (See Texio Supply in Stand Only Accessories below).

* * * Shipping/Insurance/International Duties Additional * * *

US/CA Int'l MI1-A Complete System 14,314.00 16,217.00 Complete System without Breadboard 13,750.00 15,578.00
Back to top Muon Physics (MP1-A) Complete Instrument Includes: Detector Module containing Scintillator, Photomultiplier, High Voltage Power Supply, LED with Variable Pulser • Electronics • Software with Source Code • Instructor/Student Manual (Requires User supplies computer)

* * * Shipping/Insurance/International Duties Additional * * *

	US/CA	Int'l
MP1-A Complete Instrument	4,957.00	5,618.00

Back to top

Noise Fundamentals (NF1-A)

Complete Instrument Includes: High-Level Electronics Controller • Low-Level Electronics Controller • Temperature Module w/ Probe, Break-out Box • Clear Dewar in Adjustable Height Support • Coax Cables • 45 Watt +/-15 Volt Power Supply • Hook Up Wire • Resistors, Transistors, Diodes • Photodiode in Holder • Light Bulbs and LEDS • Spare Operational Amplifiers • Instructor/Student Manual (Requires User supplied Low End Digital Oscilloscope, a Function Generator and a Good digital Voltmeter)


* * * Shipping/Insurance/International Duties Additional * * *

US/CA Int'l NF1-A Complete System - Introductory Price for 1st Ten (10) or until Sept. 1, 2010 5,950.00 6,550.00 NF1-A Complete System 6,650.00 7,650.00
Back to top Optical Pumping (OP1-E) Complete Instrument Includes: High Homogeneity Horizontal and Vertical Magnetic Field Coils on Base • Complete Optical System (Rubidium Light Source, Absorption Cell, Interference Filter, Linear Polarizer, 1/4 Wave Plate, Optical Rail, Optical Detector-Preamplifier, Lenses) • Cell Heater • Complete Electronic Controller (RF Amplifier, Detector Amplifier, Horizontal Magnetic Field Sweep, Vertical Field, Temperature Controller, Internal Power Supply) • Instructor/Student Manual For Basic Operations OP1-E requires an RF Signal Generator, 100kHz - 20 MHz. High Magnetic Field Experiments require an additional power supply = 36V, 3A (See Recommended Accessories) * * * Shipping/Insurance/International Duties Additional * * *   US/CA Int'l OP1- E Complete Instrument 13,650.00 15,437.00 Recommended Accessories:     Non-magnetic Stand for Experimental Platform 196.00 222.00 RF Signal Generator (100KHz-450MHZ) 239.00 278.00 Auxiliary High Current Power Supply - Texio PR36-3A (36V, 3A) 579.00 Inquire Circuit Diagrams 75.00 88.00 Individual Parts Rubidium Lamp 2,650.00 2,961.00 Interference Filter 432.00 486.00 Photodiode Photodetector - Small (31 mm) 342.00 388.00 Photodiode Photodetector-Large (100 mm) 371.00 420.00 Back to top Power/Audio Amplifier (PAA1-A) Complete Instrument Includes: Electronics • Universal "Brick-on-a-rope" Power Supply • Instruction Manual * * * Shipping/Insurance/International Duties Additional * * *   US/CA Int'l PAA1-A Complete Instrument 355.00 420.00 Back to top Pulsed/CW NMR Spectrometer (PS2-A) Complete Instrument Includes: Magnet with Sample Head • Gradient Coils and Temperature Stabilizer • Mainframe Electronics • Gradient Coil/Temperature Controller, 7 BNC Cables • AC Power Cord • Sample Case with 50 Vials and Caps • Instructor/Student Manual * * * Shipping/Insurance/International Duties Additional * * *   US/CA Int'l PS2-A Complete Instrument 16,750.00 18,957.00 Recommended Accessories:     Circuit Diagrams 75.00 88.00 Replacement - 50 Vials w/ Caps 65.00 72.00 Back to top Quantum Analogs (QA1-A)* Complete Instrument Includes: Atom-Molecule Models (4 Aluminum Hemispheres - one with built-in speaker and microphone, one with built-in microphone) • Band Gap Model (base, speaker, microphone, 2 sets of cylinders, 3 sets of iris) • Complete Electronics (AC low noise Amplifier, Amplitude Detector, Frequency to voltage converter) • Instructor/Student Manual * QA1-A requires a Sine wave generator capable of producing 1-50 kHz with a peak-to-peak voltage of 0.50 V such as the Protek B8003FD. * * * Shipping/Insurance/International Duties Additional * * *   US/CA Int'l QA1-A Complete Instrument 4,435.00 5,026.00 Back to top Signal Processor/Lock-In Amplifier (SPLIA1-A) Complete Instrument Includes: Preamplifier • Filter • Low-Pass Amplifier • Oscillator • Phase Shifter Noise Generator • Attenuator • Amplitude and Lock-In Detector • Seven Short BNC Cables • Instructor/Student Manual * * * Shipping/Insurance/International Duties Additional * * *   US/CA Int'l SPLIA1-A Complete Instrument 2,490.00 2,834.00 Recommended Accessory:     Power/Audio Amplifier PAA1-A 355.00 402.00 Circuit Diagrams 75.00 88.00 Back to top Sonoluminescence* (SL100-B) Complete Instrument Includes: Control Unit Electronics• Horn • TNC Horn Cable • Mounted Rectangular Cell with Ring Stand • Heater with Cable • Sample Preparation Kit with Degassing Cell • Hydrophone Probe • AC Power Cord (US/CA only) • Instructor/Student Manual * SL100-B requires a Frequency Synthesizer. (See Stand Alone Accessories Below) * * * Shipping/Insurance/International Duties Additional * * *   US/CA Int'l SL100-B Basic Instrument 5,376.00 6,088.00 Recommended Accessories:     Ramsey SG-550 Frequency Synthesizer 422.00 482.00 Photomultiplier (PMT) 714.00 811.00 Peltier Cooler Module with Cylindrical Cell 1,733.00 1,952.00 Additional Cylindrical Cell 525.00 592.00 Back to top Torsional Oscillator* (TO1-A) Complete Instrument Includes: Inquire * Driven oscillation experiments require a function or signal generator capable of 0.1 - 10 Hz. For high Q measurements, a frequency resolution of 0.01 Hz will be needed such as Protek 8003FD. * * * Shipping/Insurance/International Duties Additional * * *   US/CA Int'l TO1-A Complete Instrument 2,485.00 2,879.00 6 or more units 2,385.00 2,776.00 Back to top Two Slit Interference, One Photon at a Time* (TWS1-B) Complete Instrument Includes: Light Tight Optical Channel with Laser, Source Bulb, and Built-In Translational Stages • Double Slit Inserts with Different Slit Spacings • Slit Blocker • Acceptance Slit • Narrow Band Green Filter • Phto Diode/Photo Multiplier & Discriminator Assembly with Built-In Power supply • Instructor/Student Manual * TWS1-B requires an electronic counter with a frequency range of at least 0-1 MHz such as the B&K unit below * * * Shipping/Insurance/International Duties Additional * * *   US/CA Int'l TWS1-B Complete Instrument 5,975.00 6,824.00  3 or more units 5,929.00 6,715.00 Replacement Slits 69.00 76.00 Accessory:     Cricket (CR1-A)* converts 400ns photomultiplier pulses into audible clicks 91.00 102.00   Back to top Stand Alone Accessories - US/CA Only (Int'l - Inquire) * * * Shipping/Insurance Additional * * *   US/CA Power Supply: Texio PR36-3A 579.00 RF Signal Generator 100kHz-450MHz 229.00 Back to top