| |
course index
catalog index
diode laser spectroscopy
earth's field nmr
earth's field nmr gradient/field coil system
fabry-perot cavity
faraday rotation
hall effect
magnetic force
magnetic torque
magnetic torque's magnetic force balance
modern interferometry
muon physics
noise fundamentals
optical pumping
power/audio amplifier
pulsed/cw nmr
pulsed nmr
quantum analogs
signal processor
/lock-in amplifier
sonoluminescence
torsional oscillator
two slit interference, one photon at a time
two slit's cricket
individual parts
|
 |
|
|
US/CANADA Prices Listed Below are in USD
Please Call (716-885-4701)
or Email for Firm Prices
* * * Shipping/Handling/Insurance/International Duties Additional * * *
US/Canada Price List PDF
Diode Laser Spectroscopy
Earth's Field NMR
Fabry-Perot Cavity
Faraday Rotation
Fouier Methods - Comming Soon
Hall Effect Probe
Magnetic Force
Magnetic Torque
Modern Interferometry
Muon Physics
Noise Fundamentals
Optical Pumping
Power/Audio Amplifier
Pulse Counter/Interval Timer
Pulsed/CW NMR
Quantum Analogs
Signal Processor/Lock-In Amp
Torsional Oscillator
Two Slit Interference, One Photon at a Time
Two Slit Interference, One Photon at a Time-New Model
UltraSonics - Comming Soon
Stand Alone Accessories
Diode Laser Spectroscopy (DLS1-A)
This instrument comes in multiple configurations. Please see Diode
Laser Spectroscopy at the left and click on - The Instrument Tab for details.
Complete Instrument Includes: Laser Head • 2 Diode Lasers (tested) • Complete Electronics • 3 Photodiode Detectors with preamp • IR Viewing Card • CCD Camera • TV Monitor • Optics with all mounts and bases • Absorption Cell Assembly • 2 Safety Goggles • Special Tools • Black Anodized Aluminum Optical Breadboard • Instructor/Student Manual.
(Magnetic Experiments require a separate 36 V/3 A current regulated power supply.)
Enhanced Instrument Includes: Fabry-Perot Cavity.
Basic Experiments Only: Does not include optics needed for simultaneous interferometry or for several magnetic field experiments.
| |
US/CA |
| DLS1-A Complete Instrument |
16,315.00 |
DLS1-A Enhanced Instrument
(includes Fabry-Perot Cavity) |
17,690.00 |
Recommended Accessory |
|
| FP1-A Fabry-Perot Interferometer |
1,480.00 |
FP1-A Fabry-Perot Interferometer (w/ Diode Laser or within one semester of Diode Laser purchase) |
1,375.00 |
Auxiliary Power Supply for Magnetic Experiments: Mastech Supply |
225.00 |
DLS Partial Systems Available: |
|
Any System without Bread Board deduct |
600.00 |
| DLSB1-A Basic Experiments Only |
14,995.00 |
| DLHC-A Diode Laser and Controller |
10,860.00 |
| DLOD1-A Photodiode Detector |
359.00 |
| Optical Breadboard |
690.00 |
|
<
Back to top
Earth's Field NMR (EFNMR1-B*)
EFNMR1-B: Complete Instrument Includes: Complete Electronics (Polarization
Timer, High Q Tuner Amplifier, Tuning Controls, Sound Amplification,
Built-In Speaker) • Sample and Bucking Coil •2 Sample Holders • Gradient/Field Coil System (x,y,z Gradient Coils, Helmholtz Field Coils, Controller with Built-In Gradient Coil Power Supply)•Set of 3 Flourine Samples (non-volatile, non-toxic Perfluoropolyether Fluid: HT-110, HT-70, PFS-2) •Segmented Sample holder with Filling Syringe • Dip Needle Compass • All Connecting Cables • Instructor/Student Manual
*Premium System (US/CA Only): Includes Hall Effect Probe • 2 Mastech Power Supplies
*Separate current controlled power supplies requred with Gradient/Field Coil:
EFNMR1-A*, Sample Coil & Controller Includes: Complete EFNMR Electronics as above • Sample and Bucking Coil • Sample Holders • All Connecting Cables • Instructor/Student Manual
EFGFC1-A*, Earth's Field NMR Gradient/Field Coils System Includes: Gradient/Field Coil System as above • Dip Needle Compass • Segmented Sample Holder with Filling Syringe • All Connecting Cables • Instructor/Student Manual
| |
US/CA |
| EFNMR1-B Complete Instrument (Sample Coil and Controller plus Gradient/Field Coil System)- Mastech Power Supply not included |
7,530.00 |
| EFNMR1-B Premium System - includes HE1-A, ttwo Mastech supplies (US/CA Only) |
8,305.00 |
Recommended Accessory/Additional Parts |
|
Spin Flip Coils
| 129.00 |
| Mastech Power Supply |
225.00 |
| Extra Sample Holder |
3.50 |
| Extra Sample HolderSegmented Sample Holder with filling syringe |
89.00 |
| Additional Set Flourine Liquid Samples: (non-volatile, non-toxic) |
Perfluoropolyether Fluid HT-110
Perfluoropolyether Fluid HT-70
Perfluoropolyether Fluid PFS-2
|
114.00 |
| Adjustable Height Non-Magnetic Stand: For use with Basic EFNMR1-A ONLY |
207.00 |
| EFNMR Partial Systems Available: |
|
EFNMR1-A Basic Instrument (Sample Coil & Controller) |
4,860.00 |
| EFNMR1-A Basic Instrument with one Mastech power supply (US/CA Only) |
5,075.00 |
| EFGFC1-A: EFNMR Gradient/Field Coil System |
2,910.00 |
| EFGFC1-A: EFNMR Gradient/Field Coil System with Mastech power supply (US/CA Only) |
3,125.00 |
|
Back to top
Fabry-Perot Cavity* (FP1-A)
Basic Instrument Includes: Confocal 20 cm Cavity • Iris • 2 Support Posts w/ bases • Manual
*FP1-A requires a variable frequency laser (See our Diode Laser (DLS1-A).
(Side bands observable with DLS1-A & RF Signal generator)
| |
US/CA |
| FP1-A Basic Instrument - *requires a variable frequency laser (See DLS1-A) |
1,480.00 |
| Recommended Accessories: |
| If purchased along with Diode Laser (DLS1-A) as an accessory or if within one semester of Diode Laser purchase. |
1,375.00 |
|
Back to top
Faraday Rotation (FR1-A)
Basic Instrument Includes: Laser Light
Source • Solenoid • Special High Verdet Constant Glass Rod • Optical
Detector • Linear Polarizer in Calibrated Rotating Mount • Hardwood
Mounting Base • Instructor/Student Manual
| |
US/CA |
| FR1-A Basic Instrument |
1,128.00 |
| Enhanced Instrument - Includes Power Audio Amplifier |
1,478.00 |
| 3 or more Enhanced units |
1,440.00 |
Premium Instrument
(Includes PAA1-A & Mastech Power Supply) |
1,693.00 |
| Recommended Accessories: |
| Additional Special Glass Rod |
100.00 |
| Liquid Cell Pair ($142/ea.) |
260.00 |
| PAA1-A: Power/Audio Amplifier |
380.00 |
Signal Processor/Lock-In (SPLI-A) |
2,590.00 |
Mastech Power Supply |
225.00 |
Back to top
Hall-Effect Probe (HE1-A)
Complete Instrument Includes: Probe with Axial and Radial Detectors • Non-magnetic Base and Support Rod •
Calibration Kit (HECK1-A)• Instructor/Student Manual
(Requires 110 V power supply or adaptor)
| |
US/CA |
| HE1-A Complete Instrument |
345.00 |
| 3 or more units |
323.00 |
|
A 5% discount will apply to any Hall Effect Probe purchased in conjunction with a Magnetic Force MF1-A
Back to top
Magnetic Force* (MF1-A)
Complete Instrument Includes: Helmholtz Coil Assembly • Tower with Cap • Magnetic Dipole in Gimbal • Calibrated Spring with 1 g weights (set of 5) • Instructor/Student Manual
* MF1-A requires a 36 Volt, 3 A, current regulated power supply such as
the Mastech supply (See stand alone accessories)
| |
US/CA |
| MF1-A Complete Instrument |
455.00 |
| 5 or more units |
445.00 |
| Replacement Parts: |
|
| Tower with Cap |
50.00 |
| Magnetic Dipole in Gimbal |
65.00 |
| Brass Rod & Spring |
15.00 |
Spring |
9.00 |
1 g weights (set of 5) |
2.00 |
Back to top
Magnetic Torque (MT2-B) - Now Including Magnetic Force Balance Kit
Complete Instrument Includes: Magnetic Coils • Air Bearing •
Power Supply • Air Pump • One Magnetic Sphere •
Electronics for Strobe Light and Counter • Rotating Magnetic
Field • Gravitational Torque Arms and Sliding Weight •
Magnetic Force Balance Kit • Instructor/Student Manual
| |
US/CA |
| MT2-B Complete Instrument |
2,995.00 |
| 3 or more units |
2,785.00 |
| Without Rotating Magnetic Field |
-130.00 |
| Without Magnetic Force Balance Kit |
-140.00 |
| Additional and Replacement Parts: |
|
Magnetic Force Tower Kit
Includes: Tower with Cap, Magnetic Dipole in Gimbal, Brass Rod, Calibrated Spring, Weights |
106.00 |
| MTMFB1-A Magnetic Force Balance Kit when purchased alone |
185.00 |
| Additional Magnetic Sphere |
65.00 |
| Replacement Air Pump |
90.00 |
| Torque Arm |
6.00 |
Sliding weight for Torque Arm |
15.00 |
|
Back to top
Modern Interferometry (MI1-A)
Complete Instrument Includes: See pdf for detailed list.
Components Require Breadboard with English Dimensions
(1" center spacing, 1/4-20 tapped holes)
Magnetostriction experiments require a current regular power supply
capable of 36 V, 3 A.
(See Mastech Supply in Stand Only Accessories Below).
| |
US/CA |
| MI1-A Complete System |
15,325.00 |
| Complete System without Breadboard |
14,600.00 |
|
Back to top
Muon Physics (MP1-A)
Complete Instrument Includes: Detector Module containing Scintillator, Photomultiplier, High Voltage Power Supply, LED with Variable Pulser • Electronics • Software with Source Code • Instructor/Student Manual (Requires User supplied computer)
| |
US/CA |
MP1-A Complete Instrument
|
4,957.00 |
Back to top
Noise Fundamentals (NF1-A)
Complete Instrument Includes: High-Level Electronics Controller • Low-Level Electronics Controller
• Temperature Module w/ Probe, Break-out Box • Clear Dewar in Adjustable Height Support • Coax Cables • 45 Watt +/-15 Volt Power Supply • Hook Up Wire • Resistors, Transistors, Diodes • Photodiode in Holder • Light Bulbs and LEDS • Spare Operational Amplifiers • Instructor/Student Manual
(Requires User supplied Low End Digital Oscilloscope, a Good Voltmeter and a Function Generator such as the Protek B8003FD)
| |
US/CA |
| NF1-A Complete System |
6,980.00 |
Recommended Accessories: |
|
| Protek B8003FD Function Generator |
385.00 |
|
Back to top
Optical Pumping (OP1-E)
Complete Instrument Includes: High Homogeneity Horizontal and Vertical Magnetic Field Coils on Base • Complete Optical System (Rubidium Light Source, Absorption Cell, Interference Filter, Linear Polarizer, 1/4 Wave Plate, Optical Rail, Optical Detector-Preamplifier, Lenses) • Cell Heater • Complete Electronic Controller (RF Amplifier, Detector Amplifier, Horizontal Magnetic Field Sweep, Vertical Field, Temperature Controller, Internal Power Supply) • Instructor/Student Manual
For Basic Operations OP1-E requires an RF Signal Generator, 100kHz - 20 MHz. High Magnetic Field Experiments require an additional power supply - 36V, 3A (See Mastech Supply in Recommended Accessories below)
| |
US/CA |
| OP1- E Complete Instrument |
13,990.00 |
| Recommended Accessories: |
|
| Non-magnetic Stand for Experimental Platform |
196.00 |
| RF Signal Generator (100KHz-450MHZ) |
249.00 |
Auxiliary High Current Power Supply - Mastech (36V, 3A) |
225.00 |
| Circuit Diagrams |
75.00 |
| Individual Parts |
|
| Rubidium Lamp |
2,957.00 |
| Photodiode Photodetector - Small (31 mm) |
359.00 |
| Photodiode Photodetector-Large (100 mm) |
390.00 |
|
Back to top
Power/Audio Amplifier (PAA1-A)
Complete Instrument Includes: Electronics • Universal "Brick-on-a-rope" Power Supply • Instruction Manual
| |
US/CA |
| PAA1-A Complete Instrument |
380.00 |
|
Back to top
Pulsed/CW NMR Spectrometer (PS2-B)
Complete Instrument Includes: Magnet with Sample Head • Gradient Coils and Temperature Stabilizer • Mainframe Electronics • Gradient Coil/Temperature Controller, 7 BNC Cables • AC Power Cord • Sample Case with 50 Vials and Caps • Instructor/Student Manual
| |
US/CA |
| PS2-B Complete Instrument |
17,475.00 |
| Recommended Accessories: |
|
Circuit Diagrams |
75.00 |
Replacement - 50 Vials w/ Caps |
65.00 |
Back to top
Quantum Analogs (QA1-A)*
Complete Instrument Includes: Atom-Molecule Models (4 Aluminum Hemispheres - one with built-in speaker and microphone, one with built-in microphone) • Band Gap Model (base, speaker, microphone, 2 sets of cylinders, 3 sets of iris) • Complete Electronics (AC low noise Amplifier, Amplitude Detector, Frequency to voltage converter) • Instructor/Student Manual
* When used with an oscilloscope, QA1-A requires a Sine wave generator capable of producing 1-50 kHz with a peak-to-peak voltage of 0.50 V such as the Protek B8003FD. For experiments using a computer, a sound card is required.
| |
US/CA |
QA1-A Complete Instrument |
4,475.00 |
| Recommended Accessories: |
|
Protek B8003FD Function Generator |
385.00 |
Contact TeachSpin for sound card specifications |
Inquire |
|
Back to top
Signal Processor/Lock-In Amplifier (SPLIA1-A)
Complete Instrument Includes: Preamplifier • Filter • Low-Pass Amplifier • Oscillator • Phase Shifter Noise Generator • Attenuator • Amplitude and Lock-In Detector • Seven Short BNC Cables • Instructor/Student Manual
| |
US/CA |
| SPLIA1-A Complete Instrument |
2,590.00 |
| Recommended Accessory: |
|
Faraday Rotation - Enhanced
(Includes Power Audio Amplifier PAA1-A) |
1,478.00 |
| Power/Audio Amplifier PAA1-A |
380.00 |
Circuit Diagrams |
75.00 |
Back to top
Torsional Oscillator* (TO1-A)
Complete Instrument Includes: Inquire
* Driven oscillation experiments require a function or signal generator capable of 0.1 - 10 Hz. For high Q measurements, a frequency resolution of 0.01 Hz will be needed such as Protek 8003FD.
| |
US/CA |
| TO1-A Complete Instrument |
|
| 6 or more units |
|
| Recommended Accessory: |
|
| Protek B8003FD Function Generator |
385.00 |
Back to top
Two Slit Interference, One Photon at a Time* (TWS1-B)
Complete Instrument Includes: Light Tight Optical Channel with Laser, Source Bulb, and Built-In Translational Stages • Double Slit Inserts with Different Slit Spacings • Slit Blocker • Acceptance Slit • Narrow Band Green Filter • Photo Diode/Photo Multiplier & Discriminator Assembly with Built-In Power supply • Instructor/Student Manual
* TWS1-B requires an electronic counter with a frequency range of at least 0-1 MHz - Please inquire.
| |
US/CA |
| TWS1-B Complete Instrument |
6,215.00 |
| 3 or more units |
5,975.00 |
| Replacement Slits |
79.00 |
| Recommended Accessories: |
|
| Cricket (CR1-A)* converts 400ns photomultiplier pulses into audible clicks |
91.00 |
Pulsed Counter/Interval Timer (NEW) - If purchased within one year of TWS1-B
Expected Availability - September 2012 |
450.00 |
|
Back to top
Two Slit Interference, One Photon at a Time - NEW MODEL (TWS2-A)
Complete Instrument Includes: Light Tight Optical Channel with Laser, Source Bulb, and Built-In Translational Stages • Double Slit Inserts with Different Slit Spacings • Slit Blocker • Acceptance Slit • Narrow Band Green Filter • Photo Diode/Photo Multiplier & Discriminator Assembly with Built-In Power supply • Built-In Cricket • Pulse Counter/Interval Timer • Instructor/Student Manual
| |
US/CA |
| TWS2-A Complete Instrument |
6,665.00 |
| Replacement Slits |
79.00 |
|
Back to top
Stand Alone Accessories
| |
US/CA |
| Power Supply 36V, 3A: Mastech |
225.00 |
| RF Signal Generator 100kHz-450MHz |
249.00 |
| Protek B8003FD Function Generator |
385.00 |
| Pulse-Counter/Interval-Timer |
650.00 |
Back to top
|
