Header
Home  |  About Us  |  Unique Support  |  Users  |  Prices  |  Newsletters  |  Contact Us  |  Adv. Lab Physics Assoc.  |  Events
 


Noise Fundamentals


Newsletter – Noise Fundamentals - Where Noise IS the Signal

Specifications

  • Pre-amplifier module user-configurable; as shipped, first stage is FET-input operational amplifier, non-inverting mode, gain G1 = 600, -3 dB bandwidth > 1.0 MHz, input impedance > 100 MΩ
  • Temperature module with current source, accuracy <1%, 10 nA to 1 mA; heater voltage supply 0 - 25 V (for floating loads), 330 mA current capability
  • High-level Electronics filter sections are state-variable 2-pole Butterworth design; main amplifier gain G2 adjustable from 10 to 104, -3 dB bandwidth > 1.4 MHz
  • Noise Calibrator output level ≈ 212 ± 2 mV, rms measure, located >99% in 0 < f < 32 kHz range, with spectral density uniform to ± 2%.


introduction | the instrument | experiments | specifications | accessories | prices