| |
2011 Short Form Catalog
Instruments by Lab Topics
Instrument Overviews
diode laser spectroscopy
earth's field nmr
earth's field nmr gradient/field coil system
fabry-perot cavity
faraday rotation
fourier methods - coming soon
hall effect
magnetic force
magnetic torque
magnetic torque's magnetic force balance
modern interferometry
muon physics
noise fundamentals
optical pumping
power/audio amplifier
pulse counter/interval timer - coming soon
pulsed/cw nmr
pulsed nmr
quantum analogs
signal processor
/lock-in amplifier
sonoluminescence
torsional oscillator
two slit interference, one photon at a time
two slit's cricket
ultrasonics - coming soon
individual parts
|
 |
|
|
International Prices Listed Below are in USD
Please Call (716-885-4701)
or Email for Firm Prices
TeachSpin’s International Sales Policy: In most cases, TeachSpin is able to sell directly to the end users. We understand that it is sometimes necessary for an educational institution to work through a local importer. We are willing to do so. However, the institution is then responsible for paying the cost of having the importer handle the transaction. Our international prices are firm for all orders.
Diode Laser Spectroscopy (DLS1-A)
This instrument comes in multiple configurations. Please see Diode
Laser Spectroscopy at the left and click on - The Instrument Tab for details.
Complete Instrument Includes: Laser Head • 2 Diode Lasers (tested) • Complete Electronics • 3 Photodiode Detectors with preamp • IR Viewing Card • CCD Camera • TV Monitor • Optics with all mounts and bases • Absorption Cell Assembly • 2 Safety Goggles • Special Tools • Black Anodized Aluminum Optical Breadboard • Instructor/Student Manual.
(Magnetic Experiments require a separate 36 V/3 A current regulated power supply.)
Enhanced Instrument Includes: Fabry-Perot Cavity.
Basic Experiments Only: Does not include optics needed for simultaneous interferometry or for several magnetic field experiments.
* * * Shipping/Insurance/International Duties Additional * * *
| |
Int'l |
| DLS1-A Complete Instrument |
17,935.00 |
DLS1-A Enhanced Instrument
(includes Fabry-Perot Cavity) |
19,360.00 |
Recommended Accessory |
|
| FP1-A Fabry-Perot Interferometer |
1,610.00 |
FP1-A Fabry-Perot Interferometer (w/ Diode Laser or within one semester of Diode Laser purchase) |
1,425.00 |
DLS Partial Systems Available: |
|
Any System without Bread Board deduct |
615.00 |
| DLSB1-A Basic Experiments Only |
16,390.00 |
| DLHC-A Diode Laser and Controller |
11,930.00 |
| DLOD1-A Photodiode Detector |
395.00 |
| Optical Breadboard |
770.00 |
| Absorption Cell Assembly |
2,900.00 |
|
|
Back to top
Earth's Field NMR (EFNMR1-B*)
EFNMR1-B: Complete Instrument Includes: Complete Electronics (Polarization
Timer, High Q Tuner Amplifier, Tuning Controls, Sound Amplification,
Built-In Speaker) • Sample and Bucking Coil •2 Sample Holders • Gradient/Field Coil System (x,y,z Gradient Coils, Helmholtz Field Coils, Controller with Built-In Gradient Coil Power Supply)•Set of 3 Flourine Samples (non-volatile, non-toxic Perfluoropolyether Fluid: HT-110, HT-70, PFS-2) •Segmented Sample holder with Filling Syringe • Dip Needle Compass • All Connecting Cables • Instructor/Student Manual
*Separate current controlled power supplies requred with Gradient/Field Coil:
EFNMR1-A*, Sample Coil & Controller Includes: Complete EFNMR Electronics as above • Sample and Bucking Coil • Sample Holders • All Connecting Cables • Instructor/Student Manual
EFGFC1-A*, Earth's Field NMR Gradient/Field Coils System Includes: Gradient/Field Coil System as above • Dip Needle Compass • Segmented Sample Holder with Filling Syringe • All Connecting Cables • Instructor/Student Manual
* * * Shipping/Insurance/International Duties Additional * * *
| |
|
Int'l |
| EFNMR1-B Complete Instrument (Sample Coil and Controller plus Gradient/Field Coil System)- Texio Power Supply not included |
|
8,283.00 |
Recommended Accessory/Additional Parts |
|
|
Spin Flip Coils
| |
141.00 |
| Extra Sample Holder |
|
4.00 |
| Extra Sample HolderSegmented Sample Holder with filling syringe |
|
99.00 |
| Additional Set Flourine Liquid Samples: (non-volatile, non-toxic) |
Perfluoropolyether Fluid HT-110
Perfluoropolyether Fluid HT-70
Perfluoropolyether Fluid PFS-2
|
|
126.00 |
| Adjustable Height Non-Magnetic Stand: For use with Basic EFNMR1-A ONLY |
|
230.00 |
| EFNMR Partial Systems Available: |
|
|
EFNMR1-A Basic Instrument (Sample Coil & Controller) |
|
5,346.00 |
| EFGFC1-A: EFNMR Gradient/Field Coil System |
|
3,200.00 |
|
|
Back to top
Fabry-Perot Cavity* (FP1-A)
Basic Instrument Includes: Confocal 20 cm Cavity • Iris • 2 Support Posts w/ bases • Manual
*FP1-A requires a variable frequency laser (See our Diode Laser (DLS1-A).
(Side bands observable with DLS1-A & RF Signal generator)
* * * Shipping/Insurance/International Duties Additional * * *
| |
|
Int'l |
| FP1-A Basic Instrument - *requires a variable frequency laser (See DLS1-A) |
|
1,610.00 |
| Recommended Accessories: |
| If purchased along with Diode Laser (DLS1-A) as an accessory or if within one semester of Diode Laser purchase. |
|
1,425.00 |
|
|
|
Back to top
Faraday Rotation (FR1-A)
|
Basic Instrument Includes: Laser Light
Source • Solenoid • Special High Verdet Constant Glass Rod • Optical
Detector • Linear Polarizer in Calibrated Rotating Mount • Hardwood
Mounting Base • Instructor/Student Manual
* * * Shipping/Insurance/International Duties Additional * * *
| |
|
Int'l |
| FR1-A Basic Instrument |
|
1,241.00 |
| Premium Instrument - Includes Power Audio Amplifier |
|
1,610.00 |
| 3 or more Premium units |
|
1,584.00 |
| Recommended Accessories: |
| Additional Special Glass Rod |
|
113.00 |
| Liquid Cell Pair ($157/ea) |
|
290.00 |
| PAA1-A: Power/Audio Amplifier |
|
418.00 |
Signal Processor/Lock-In (SPLI-A)
Needed for AC Measurements
|
|
2,850.00 |
Back to top
Hall-Effect Probe (HE1-A)
Complete Instrument Includes: Probe with Axial and Radial Detectors • Non-magnetic Base and Support Rod •
Calibration Kit (HECK1-A)• Instructor/Student Manual
(Requires 110 V power supply or adaptor)
* * * Shipping/Insurance Additional * * *
| |
Int'l |
| HE1-A Complete Instrument |
380.00 |
| 3 or more units |
360.00 |
| Hall Effect Calibration Kit (HECK1-A) Only |
29.00 |
|
|
A 5% discount will apply to any Hall Effect Probe purchased in conjunction
with a Magnetic Force MF1-A
Back to top
Magnetic Force* (MF1-A)
Complete Instrument Includes: Helmholtz Coil Assembly • Tower
with Cap • Magnetic Dipole in Gimbal • Calibrated Spring
with 1 g weights (set of 5) • Instructor/Student Manual |
* * * Shipping/Insurance/International Duties Additional * * *
* MF1-A requires a 36 Volt, 3 A, current regulated power supply
| |
Int'l |
| MF1-A Complete Instrument |
500.00 |
| 5 or more units |
490.00 |
| Replacement Parts: |
|
| Tower with Cap |
55.00 |
| Magnetic Dipole in Gimbal |
65.00 |
| Brass Rod & Spring |
17.00 |
Spring |
10.00 |
1 g weights (set of 5) |
2.00 |
Back to top
Magnetic Torque (MT1-B) - Now Including Magnetic Force Balance Kit
Complete Instrument Includes: Magnetic Coils • Air Bearing •
Power Supply • Air Pump • One Magnetic Sphere •
Electronics for Strobe Light and Counter • Rotating Magnetic
Field • Gravitational Torque Arms and Sliding Weight •
Magnetic Force Balance Kit • Instructor/Student Manual
* * * Shipping/Insurance/International Duties Additional * * *
| |
Int'l |
| MT1-B Complete Instrument |
3,285.00 |
| 3 or more units |
3,100.00 |
| Without Rotating Magnetic Field |
-135.00 |
| Without Magnetic Force Balance Kit |
-150.00 |
| Additional and Replacement Parts: |
|
Magnetic Force Tower Kit
Includes: Tower with Cap, Magnetic Dipole in Gimbal, Brass Rod, Calibrated Spring, Weights |
115.00 |
| MTMFB1-A Magnetic Force Balance Kit when purchased alone |
205.00 |
| Additional Magnetic Sphere |
70.00 |
| Replacement Air Pump |
99.00 |
| Torque Arm |
7.00 |
Sliding weight for Torque Arm |
17.00 |
|
|
Back to top
Modern Interferometry (MI1-A)
Complete Instrument Includes: See pdf for detailed list.
Components Require Breadboard with English Dimensions
(1" center spacing, 1/4-20 tapped holes)
Magnetostriction experiments require a current regular power supply
capable of 36 V, 3 A.
* * * Shipping/Insurance/International Duties Additional * * *
| |
|
Int'l |
| MI1-A Complete System |
|
16,720.00 |
| Complete System without Breadboard |
|
15,995.00 |
|
|
Back to top
|
Muon Physics (MP1-A)
Complete Instrument Includes: Detector Module containing Scintillator, Photomultiplier, High Voltage Power Supply, LED with Variable Pulser • Electronics • Software with Source Code • Instructor/Student Manual (Requires User supplied computer)
* * * Shipping/Insurance/International Duties Additional * * *
| |
|
Int'l |
MP1-A Complete Instrument
|
|
5,518.00 |
Back to top
Noise Fundamentals (NF1-A)
Complete Instrument Includes: High-Level Electronics Controller • Low-Level Electronics Controller
• Temperature Module w/ Probe, Break-out Box • Clear Dewar in Adjustable Height Support • Coax Cables • 45 Watt +/-15 Volt Power Supply • Hook Up Wire • Resistors, Transistors, Diodes • Photodiode in Holder • Light Bulbs and LEDS • Spare Operational Amplifiers • Instructor/Student Manual
(Requires User supplied Low End Digital Oscilloscope, a Good Voltmeter and a Function Generator such as the Protek B8003FD)
* * * Shipping/Insurance/International Duties Additional * * *
| |
Int'l |
| NF1-A Complete System |
7,680.00 |
Recommended Accessory: |
|
| Protek B8003FD Function Generator |
420.00 |
|
|
Back to top
Optical Pumping (OP1-E)
Complete Instrument Includes: High Homogeneity Horizontal and Vertical Magnetic Field Coils on Base • Complete Optical System (Rubidium Light Source, Absorption Cell, Interference Filter, Linear Polarizer, 1/4 Wave Plate, Optical Rail, Optical Detector-Preamplifier, Lenses) • Cell Heater • Complete Electronic Controller (RF Amplifier, Detector Amplifier, Horizontal Magnetic Field Sweep, Vertical Field, Temperature Controller, Internal Power Supply) • Instructor/Student Manual
For Basic Operations OP1-E requires an RF Signal Generator, 100kHz - 20 MHz. High Magnetic Field Experiments require an additional power supply - 36V, 3A (Inquire)
* * * Shipping/Insurance/International Duties Additional * * *
| |
| |
Int'l |
| OP1- E Complete Instrument |
15,425.00 |
| Recommended Accessories: |
|
| Non-magnetic Stand for Experimental Platform |
222.00 |
| RF Signal Generator (100KHz-450MHZ) |
278.00 |
| Circuit Diagrams |
88.00 |
| Individual Parts |
|
| Rubidium Lamp |
3,250.00 |
| Photodiode Photodetector - Small (31 mm) |
395.00 |
| Photodiode Photodetector-Large (100 mm) |
435.00 |
|
|
Back to top
Power/Audio Amplifier (PAA1-A)
Complete Instrument Includes: Electronics • Universal "Brick-on-a-rope" Power Supply • Instruction Manual
* * * Shipping/Insurance/International Duties Additional * * *
| |
Int'l |
| PAA1-A Complete Instrument |
418.00 |
|
|
| |
Back to top
Pulsed/CW NMR Spectrometer (PS2-B)
Complete Instrument Includes: Magnet with Sample Head • Gradient Coils and Temperature Stabilizer • Mainframe Electronics • Gradient Coil/Temperature Controller, 7 BNC Cables • AC Power Cord • Sample Case with 50 Vials and Caps • Instructor/Student Manual
* * * Shipping/Insurance/International Duties Additional * * *
| |
Int'l |
| PS2-B Complete Instrument |
19,480.00 |
| Recommended Accessories: |
|
Circuit Diagrams |
88.00 |
Replacement - 50 Vials w/ Caps |
72.00 |
Back to top
Quantum Analogs (QA1-A)*
Complete Instrument Includes: Atom-Molecule Models (4 Aluminum Hemispheres - one with built-in speaker and microphone, one with built-in microphone) • Band Gap Model (base, speaker, microphone, 2 sets of cylinders, 3 sets of iris) • Complete Electronics (AC low noise Amplifier, Amplitude Detector, Frequency to voltage converter) • Instructor/Student Manual
* When used with an oscilloscope, QA1-A requires a Sine wave generator capable of producing 1-50 kHz with a peak-to-peak voltage of 0.50 V such as the Protek B8003FD. For experiments using a computer, a sound card is required.
* * * Shipping/Insurance/International Duties Additional * * *
| |
Int'l |
| QA1-A Complete Instrument |
4,930.00 |
| Recommended Accessories: |
|
| Protek B8003FD Function Generator |
420.00 |
Contact TeachSpin for sound card specifications |
Inquire |
|
|
Back to top
|
Signal Processor/Lock-In Amplifier (SPLIA1-A)
Complete Instrument Includes: Preamplifier • Filter • Low-Pass Amplifier • Oscillator • Phase Shifter Noise Generator • Attenuator • Amplitude and Lock-In Detector • Seven Short BNC Cables • Instructor/Student Manual
* * * Shipping/Insurance/International Duties Additional * * *
| |
Int'l |
| SPLIA1-A Complete Instrument |
2,850.00 |
| Recommended Accessory: |
|
| Power/Audio Amplifier PAA1-A |
418.00 |
| Circuit Diagrams |
88.00 |
Faraday Rotation w/ PAA1-A |
1,610.00 |
Back to top
Torsional Oscillator* (TO1-A)
Complete Instrument Includes: Inquire
* Driven oscillation experiments require a function or signal generator capable of 0.1 - 10 Hz. For high Q measurements, a frequency resolution of 0.01 Hz will be needed such as Protek 8003FD.
* * * Shipping/Insurance/International Duties Additional * * *
| |
Int'l |
| TO1-A Complete Instrument |
|
| 6 or more units |
|
| Recommended Accessory: |
|
| Protek B8003FD Function Generator |
420.00 |
Back to top
Two Slit Interference, One Photon at a Time* (TWS1-B)
Complete Instrument Includes: Light Tight Optical Channel with Laser, Source Bulb, and Built-In Translational Stages • Double Slit Inserts with Different Slit Spacings • Slit Blocker • Acceptance Slit • Narrow Band Green Filter • Phto Diode/Photo Multiplier & Discriminator Assembly with Built-In Power supply • Instructor/Student Manual
* TWS1-B requires an electronic counter with a frequency range of at least 0-1 MHz - Please Inquire
* * * Shipping/Insurance/International Duties Additional * * *
| |
|
Int'l |
| TWS1-B Complete Instrument |
|
6,824.00 |
| 3 or more units |
|
6,715.00 |
| Replacement Slits |
|
76.00 |
| Accessory: |
|
|
| Pulse Counter/Interval Timer (if purchased w/in one year of TWS1-B) |
|
500.00 |
| Cricket (CR1-A)* converts 400ns photomultiplier pulses into audible clicks |
|
102.00 |
|
|
Two Slit Interference, One Photon at a Time - NEW MODEL (TWS2-A)
Complete Instrument Includes: Light Tight Optical Channel with Laser, Source Bulb, and Built-In Translational Stages • Double Slit Inserts with Different Slit Spacings • Slit Blocker • Acceptance Slit • Narrow Band Green Filter • Photo Diode/Photo Multiplier & Discriminator Assembly with Built-In Power supply • Built-In Cricket • Pulse Counter/Interval Timer • Instructor/Student Manual
| |
Int'l |
| TWS2-A Complete Instrument |
7,324.00 |
| Replacement Slits |
76.00 |
|
Back to top
Back to top
Stand Alone Accessories - Inquire
* * * Shipping/Insurance Additional * * *
| |
|
| RF Signal Generator 100kHz-450MHz |
278.00 |
| Protek B8003FD Function Generator |
420.00 |
| Pulse-Counter/Interval-Timer (PCIT1-A) |
695.00 |
Back to top
|
|
